Trionics Actuator 20 The Enzyme Color Developer improves results versus a regular 20-30 volume peroxide. Use with all permanent colors, liquid and powder bleach.

WHEN COLORING TO MAKE HAIR LIGHTER:
Mix following manufacturer’s directions substituting Actuator for regular peroxide.
Apply to hair following manufacturer’s directions.
Cover hair loosely with a clean, plastic cap.
Place patron under a warm preheated dryer for a minimum of 10 minutes to a maximum of 20 minutes.
Check color development after 10 minutes. If desired result is not achieved, check every few minutes up to 20 minutes until you do so.
Comb through ends if necessary and leave on an additional 3-10 minutes.
Do not go back under dryer. Do not put cap back on.
Rinse thoroughly and shampoo.
NOTE: Color processes faster under a warm dryer. Without use of a dryer, the benefits of the enzymes remain but color will process in normal amount of time.

WHEN BLEACHING WITH LIQUID BLEACH:
Mix bleach following manufacturer’s directions substituting Actuator for regular peroxide.
Apply to hair following manufacturer’s directions.
Cover hair loosely with a clean, plastic cap. - Place patron under a warm preheated dryer for a minimum of 10 minutes to a maximum of 20 minutes.
Check color development after 10 minutes. If desired result is not achieved, check every few minutes up to 20 minutes until desired lightening results are obtained. - If level of lift is not achieved after 20 minutes under dryer, take client out from under dryer and allow processing to continue cap off for another 10–20 minutes.
Once desired results are achieved, rinse thoroughly and shampoo.
NOTE: Color processes faster under a warm dryer. Without use of a dryer, the benefits of the enzymes remain but color will process in normal amount of time.

WHEN STREAKING, FROSTING, TIPPING AND HIGHLIGHTING WITH POWDER BLEACH:
When hair has been pulled through streaking cap, mix powder bleach following manufacturer’s directions substituting Actuator for regular peroxide.
Apply to hair following manufacturer’s directions.
Cover hair loosely with a clean, plastic cap.
Place patron under a warm preheated dryer.
After 10 minutes, check bleach development. If desired result has not been achieved, check every few minutes up to 20 minutes until desired lightening results are obtained.
On the rare occasion when level of lift is not achieved after 20 minutes under dryer, take client out from under dryer and allow processing to continue cap off for another 5-10 minutes.
Once desired results are achieved, rinse thoroughly and shampoo.
If additional toning is required, please refer to toning application section under Accent directions.
NOTE: Color processes faster under a warm dryer. Without use of a dryer, the benefits of the enzymes remain but color will process in normal amount of time.